intero
Back to blog
Compliance

The HazCom Deadline on November 20, 2026: What Employers Must Update

By Intero Team
An illustration of a chemical drum with an updated supplier label beside a spray bottle whose workplace label still shows the old hazard information

OSHA's revised Hazard Communication Standard has a deadline this week that lands on employers, not chemical suppliers. By November 20, 2026, any employer using hazardous chemicals must bring its own hazard communication up to date for substances whose hazards were reclassified under the new rule.

The standard is 29 CFR 1910.1200. OSHA updated it in May 2024 to align with Revision 7 of the UN Globally Harmonized System, and in January 2026 it pushed every compliance date back by four months. The agency said it had not finished the guidance that employers and its own staff needed in time for the original dates.

Hazard Communication sits second on OSHA's preliminary list of the most frequently cited standards for fiscal year 2026, behind fall protection in construction.

The dates

The rule phases in by who does the work and by whether the chemical is a substance or a mixture.

| Who | Substances | Mixtures | |---|---|---| | Chemical manufacturers, importers and distributors | May 19, 2026 | November 19, 2027 | | All employers | November 20, 2026 | May 19, 2028 |

Suppliers had until May 19 to evaluate substances and send out revised safety data sheets. The November date is the employer's turn to act on what arrived.

What falls due on November 20

The rule says that by this date employers "shall, as necessary, update any alternative workplace labeling" used under paragraph (f)(6). In the same paragraph it requires two more updates for substances with newly identified hazards:

  • the written hazard communication program under paragraph (h)(1)
  • additional employee training under paragraph (h)(3)

"As necessary" is doing real work in that sentence. An employer that never received a revised SDS, or received one and filed it without reading it, has no way of knowing what is necessary. The first job is to find out which of your substances changed.

Reading it as an investigator

When we investigate a chemical exposure or a burn, hazard communication is a chain of barriers. Each link can fail on its own, and the report has to say which one did.

The supplier's SDS. The question is whether the current version was on site, and when it arrived. Revised sheets were due from suppliers by May 19. Some will have come by email to purchasing and never reached the people who maintain the SDS library.

The workplace label. Most exposures we see involve a secondary container: a spray bottle, a day tank, a bucket decanted from a drum. Those carry the employer's own labels, and they are exactly what paragraph (f)(6) covers. A common finding is a current SDS in the binder and a label on the bottle that still shows the old hazards. The worker reads the bottle.

The written program. A program that lists chemicals and classifications from before the update describes a workplace that no longer exists. In an investigation we compare it against the inventory and the labels in use that day.

The training. Records that show a hazard communication session took place say little about whether it covered the hazards that changed. We look at when the session ran and what it covered, then at whether the people on the task attended. Then we ask them what they understood the hazard to be.

A finding that says a worker "did not follow the SDS" is rarely the end of it. The useful question is what information reached the worker at the point of use, and whether it was correct.

Actions that would hold

If you are working toward the date, or checking after it, these are the steps we would expect to see, each with an owner role and a date.

  • Pull the list of hazardous substances on site and confirm a revised SDS was received for each, chasing suppliers for any that are missing.
  • Mark every substance whose classification or label elements changed.
  • For each one, find every secondary container and every alternative workplace label it appears on, and replace those labels.
  • Update the written program so its chemical list and classifications match the revised SDSs.
  • Train the people who use the changed substances on what changed, and record who attended and what was covered.
  • Put the mixtures dates on the calendar now. Revised SDSs for mixtures are due from suppliers by November 19, 2027, and the employer updates by May 19, 2028.

Each step should close with evidence, such as the revised labels in place and the attendance record. A few weeks later, walk the floor and check that decanted containers still carry the new labels.

Where Intero fits

Intero investigates incidents. When an exposure or a chemical burn happens, an investigator describes what happened and adds the photos and statements they have. Intero asks the follow-up questions a lead investigator would, one at a time, including what the container was labeled with and what the person had been told about the hazard.

In the analysis, each barrier is graded held, failed, partial, absent or unknown, and every finding cites the evidence it rests on. If the written program or the training record is in the organization's library, Intero reads it with the case, so an out-of-date label or a training session that predates the change shows up in the analysis.

Corrective actions are written up the hierarchy of controls, and each traces to a finding. When an action is finished, its owner is asked by its horizon whether the fix held.

You can see how a case runs in Intero and what the workspace includes.

A check worth doing this week

Pick five secondary containers on one line. For each, read the label, then find the current SDS for what is inside and compare the hazard statements and pictograms. If any do not match, you have found the first gap before an investigation has to.

If you want to see how Intero takes an incident from the first report to a fix that holds, book a demo.

---

Sources

Ready to see Intero in action?

Book a demo and see what AI agents can do for your safety operations.